The purifier is equipped with replacement indicators that will notify you when it is time to replace the Carbon or HEPA filter, or the UV lamp. Plan on replacing the Carbon every 3-4 months, HEPA every 12-15 months, and UV lamp every 24 months.

Anywhere you want to measure the air quality within the room! For optimal performance, place the SensorPod away from the air purifier on a counter or table. In Auto Mode, the purifier will work to distribute clean air until the SensorPod reads an acceptable level of air quality. Make sure the SensorPod and purifier are in the same room.

Check that the power cord is connected securely to both the wall outlet and the purifier. Check if there is a power outage in the outlet by trying a nearby light or device or by trying a working device in the same outlet. Check that the HEPA filter is fitted properly into filter chamber. Please contact us if you’re still having a problem.

Disconnect the power by unplugging the purifier from the outlet, and then plug the power cord back into the outlet. All button functionality should return.

Auto Mode is only available when the purifier can react to air quality readings from the SensorPod, so check that the SensorPod is plugged-in and that its light is solid. The radio light on the purifier will blink if the purifier is not responding to the SensorPod.

Check that the purifier is in the same room and powered-on. If it is, you’ll need to follow the pairing procedures in the manual.